More Wool & Glue

String & Glue

Have you ever used a glue gun? asks Badger. I got terrible burns at art college says Audrey. The gun gets plugged in and melts the glue which can be squeezed out via trigger.

It sticks the woven copper wire in seconds

Wire Progress

I think this needs to hang.
and this needs something more interesting over the paper maybe? Once the glue is dry the paper is quite tough. Perhaps some fine Japanese paper?

Papering Over

I am now pasting tissue paper over the wire structure with PVA glue. It should let the light through. It does tear easily on the wire though especially at pressure points.



















Meanwhile the other plaster and wire creations are continuing to evolve ... here they are in the cupboard. They didn't want to come out for the photos.

Wire Sculpture Again

Then the following week, there was some chicken wire and I realised that my first effort was a bit shit so I started again. I want a form that entwines itself a la mode of the mobius strip and DNA. The maquette was easy anyway! I made the structure by cutting and fashioning three long wire tubes and then knitting them together. Pretty straightforward really.













I quite like this version. The next decision is how to decorate - Karim suggested paper which I think has legs.

Wire Scuplture

I wanted to start another wire sculpture but there was no chicken wire in the studio ... so I tried plaster and scrim on a coil of armature wire. However this was not an adequate substitute and resulted in this.







Which is not in itself terrible, despite mirth from the cheap seats ...

The Lava Lamp?

A few holes are now cut into the plaster wire structure and the edges smoothed with plaster and scrim. Bryn says it's gynaecological. Both the inside and outside are part of the sculpture. I reach my arm inside like a vet facilitating a calf's birth.




With a light inside it has a totally different feel and aura.

The Thing

2 more hours of applying plaster earlier today have resulted in this. I am deliberately leaving holes in the structure, possibly with a view to lighting it from the inside.

Direct Plaster

I've also got this going. It's direct plaster onto chicken wire inspired by the fabulous Audrey Reynolds.
I cut some chicken wire and then connected/sealed it into a pillow shape. I am looking for a lot of in and out in the sculpture. I am interested in the rippled surface of seeds like dates and nuts and have attempted to recreate this here.









Scrim is cut and dipped into wet plaster, then applied directly to the chicken wire. I have used two different types of scrim, one a tight knit gauze and anotherthat is woolier and thicker.

Here's a couple of hours worth of plaster applied. It's getting heavy.








But here I am lifting the alternative F.A. Cup

Lost Wax at Home

When Mrs T was not looking, I did some lost wax at home in the kitchen. I really like this one.

I made this one in a plastic water bottle which was easy to cut away once the plaster had set

Emergence sans Sprues

The sprues have been cut away and a small amount of finishing applied to the metal with files, colour powder and elbow grease. It's probably best left fairly natural though

Emergence

ॐ शांति शांति शांति

The aum on the left is plaster, painted in metallic acrylics. On the right is the original clay fired with a metallic glaze.

Lost Wax Process 5

It is difficult to break the plaster casing out of the tin - it took 2 hours! I had greased the inside with wax but obviously insufficiently. Anyway ... eventually I chipped it all away to reveal this ...

Glazing

Each week I have been trying out new glaze effects on those bit of clay I made in September. The purple wisteria colour is a matt underglaze which was fired then covered with a clear glaze and refired to produce the more shiny effect. The two browner pictures are mainly clear glaze with just a little colour beneath.

Lost Wax Process 4

The wax sculpture is then inverted, a reservoir added on the bottom and it is then set in plaster











The plaster cast is then set in the wax melter. The wax slowly melts over about an hour

Lost Wax Process 3

Lost Wax Process 2

The finished wax is a human-like form emerging from the primordial waters. Sprues are added to aid the flow of molten metal to all parts of the sculpture.

Matsya

Beautiful South Indian lost wax bronze

Lost Wax

So I started another lost wax project, getting some inspiration from both my clay models and a beautiful South Indian bronze of Vishnu as Matsya that I picked up in Chidambaram, Tamil Nadu. I bought some low melt metal from Tiranti's near Warren Street. The man assured me it was lead free pewter - however it seems to have a smidgeon of the stuff therein. Please wash your hands before you eat your rice & curry.

More Gel Flex Aums

Due to the success of last season's must have aum, I made a new clay model and a gel flex mould. I had to melt down the first one, as I forgot to create a significant enough clay wall and gulley around the object that could act as an edge once the mould was made. Anyway, the second go worked out fine:

Clay Models

I started my second year at Mary Ward by making some shapes in clay to give me inspiration. I found I liked the shapes I could make from rolling out the clay with a rolling pin and then forming an abstract shape by rolling, throwing or dropping the resultant clay sheet. Some were fired and one has so far been glazed with a metallic finish. The glaze took 3 coats and had to be set on blocks in the kiln as the glazed bottom would have glued it to the kiln surface! Sorry.

Badger The Blogger

Alabaster

Here is a small piece of alabaster fashioned into an out of focus necklace ...

It could have been thinner but I thought I'd stop before I broke it. Anyway Mal likes it.

Stone Carving

I learnt some stone carving techniques over the summer, working mainly with soapstone. I used a gouge and a hammer and chisel to hack bits off, carve and make holes in a lump of green mottled soapstone. The finish is quite rough until smoothed down with files or rasps and buffed up with sandpaper, rag and polish.

One issue is that only when you have buffed the sculpture that you can really see all the imperfections. So it can be quite an iterative process. The piece pictured is nowhere near as smooth as it could be.

It is easier to smoothe out a smaller more regular piece like this aum.

Hand Cast in Plaster

It looks almost real. See below for the easy steps a person should take if you want to cast your own body parts for posterity!

Hand Cast

First mix the alginate with an equal volume of water. It sets very quickly so you have to mix it quickly too!








Pour the mix into a suitable container (here a sawn off water bottle) and plunge in the limb that you wish to caste. Pretty soon you are stuck fast.









Now for the life of me can I get this off?






Eventually yes! Fill with plaster and wait a while. It's best to use hard plaster such as "crystocal" but as MWC had run out I had to use a softer fine plaster which makes the mould more brittle. Finally away the alginate and here is the finished cast of my hand in a meditation mudra.

My Old Cast Off Clay Head

Is now a scary garden flower pot ... waste not, want not I say. He lost his ears and a bit of his nose when the plaster mould was made.