Brothers?

The Finished Cement Fondue Head

enjoys the flowers in a postage stamp garden!
Having repaired the broken ears, filled in a few holes, filed down the rough edges and made a base with Paul's help, the final model was left to set. It's important to keep the sculpture wrapped in wet cloths and therefore damp so that the cement will set properly.

4 different pastes were then used to bring out the bronzelike finish shown here: a graphite paste, two types of bronze paste and a turquoise - what's it called Vertigina or something? Each was buffed up with a rag to bring out the finish.

Behind you!

Chipping Out Of The Mould

I break away the plaster mould and finally the cement fondue head appears. Clare does the same. Unfortunately my ears are not complete as I had not got enough cement or fibre glass into these narrow gaps. Pieces break off but this can be repaired with goo (cement & water). Also, the pieces of plaster must all be chipped off and the sculpture washed.

Getting There

Back for the summer at MWC. Have now made two cement and one fibre glass & "goo" layer inside the oiled mould. The cement is made by mixing cement:sand:water in the ration 6:2:1. A thin layer is pressed into the mould, ideally only a few grains thick, so that it doesn't move. I messed this bit up a bit second time around and expect to see the effects when the final objet d'art is revealed next week! The goo is custard constituency cement and water and the fibre glass for which you need a mask and gloves is easily broken up from a big sheet into little pieces. We wet it first to minimise dust and then just pulled it apart. Cutting is not advisable as it produces more glass shards & dust. Finally when the layers were in place, the two sides of the mould were put together, fastened with rubber bands and then a final layer of fibre glass and goo was pasted across the joins. The base was also strengthened with goo and fibre glass. The whole is then wrapped up with wet cloths and inside plastic bags. The cement would not set properly without this apparently. Fingers crossed.

Evolution?

Do The Greats Do These Bits?

I wonder. Hmmm. The clay mould set hard, then had to be prised apart, then carefully scrubbed clean. It took ages to get the little bits of clay out of every nook and cranny. Then the whole thing needed basting with engine oil - seriously! All of that took 2 sessions - 5 hours; Henry Moore eat your heart out. Apparently he just made everything in polystyrene or found an interesting stone and then told some workmen to replicate. One day, one day ... anyway here is the oiled mould:

Plaster Mould

Plaster is thrown at and pasted onto the clay to form the mould. You can see the line of clay on top of the shims, effectively keeping the 2 plaster halves apart. This will enable the two sides of the mould to be easily prised apart. The plaster needs to be about an inch thick.

Shimming

A plaster mould will next be made from the clay model. This mould needs to be in 2 sections and to achieve this, a barrier of metal "shims" is created through the middle of the model. I had to use cut up pieces of old beer cans. These need to fit very snugly together to prevent any plaster bleeding through the divide. An edge of clay is added to act as a clear marker once plaster is added.

Greeks

Well, the head is looking better with some hair and the ears are now not bad. Last week I visited the British Museum. I wanted to get some ideas of how sculptors down the ages had created ears and eyes. The Greek statues have blank eyes like this, apparently because they were originally painted. Anyway, next I'll try to do something with the eyes.

Final Clay

It was really difficult to get the eyes right and I needed Paul's advice.
In the end I went for gouging out a hole to indicate the pupil and made a slight indent for the eyeball. This is the final clay model - it does have a hint of me I think. Next I will need to make the plaster mould.

Clay Head Progress

Progress has been slow, but it does take time to get not only the individual features right (or at least plausible) in themselves but also in relation to each other and as a whole. I get Paul's feedback every now and then and find out: ears are not just stuck on but flow from the cheek, lie behind the jawline and always contain a C and a Y; lips do not end in points, they are rolls of flesh; your eyes are actually quite far back into your head and round to the side.

I created these comparison photo montages using Photoshop - they will help me sort out where the sculpture needs tweaking!

Head progress

Another 2 and a half hours with a little progress – worked on the mouth and face shape. I had been away for couple of weeks so was glad I had wrapped the model tightly in a plastic bag so as to retain moisture. It was still perfectly workable.







I think it's human anyway.












Maybe some ear work next?

Cement Fondue 2

Following Paul’s direction, rolled up newspaper in a rough head shape is put in a plastic bag and wound round a wooden block, tied with fine wire. Clay is then moulded onto this basic frame. This is hard work. Will it be human?

Cement Fondue

This project is a head in Cement Fondue. Heads seem to be pretty popular in this class. Unfortunately, the only available model is this guy …

Lost Wax Metal Figure

Filed down, sprues removed, he looks like this.

Lost Wax Process

The wax model was encased in a plaster mould and left for a week. The mould was shaved to fit the wax melter in the studio and then I melted out the wax, which took a while as the whole mould had to get hot enough to melt the wax in the head. Then I cut up and melted some low melt metal in a saucepan - Paul says it is primarily tin - it's pretty soft. The liquid metal was then poured in to the mould. I had made wax sprues on the model to allow the molten metal to flow to the head and other difficult areas. Then, the moment of truth: the plaster is broken away and sure enough here is a metal version of my wax sculpture! You can see the sprues, from the chin to the lap for instance, which now need filing off.

The Collected Works

Here's a shot of the collected works so far! It's been good to try so many different techniques.

Wax Sculpture

This week I thought I'd try wax sculpture. I have been collecting Buddhist and Hindu images for nearly 20 years and the finest pieces are often created via the lost wax process, whereby a mould is made around a wax model, the wax melted out ("lost") and hot metal poured in. The two metal Buddhas in the photos are from my collection - the larger one is a particularly serene and beautifully crafted Nepali bronze.

Could I make my own lost wax Buddha? I soon found out that carving something beautiful in wax is quite difficult and that sadly I am not yet very skillful! Given the looming end of term, I decided just to create a recognisable meditating figure and be happy with trying the process. I started off using a harder green wax for the face, although ultimately I used the softer yellow wax for the whole figure. It is interesting to note how different and more pliable the wax becomes once it heats up due to handling.

Latex Moulds from Metal Buddha Sculptures

After testing that the latex would not stain the Buddha statues - actually it cleaned them up a bit - these 2 Buddhas were painted with progressive layers of latex over a 2 and half hour session. Gaps like under the arms of the metal sculptures were filled in with small bits of wax. Without this the mould would not come off easily as the latex would form a loop around the shoulders. By the following week the latex moulds were ready, carefully peeled off and then cast in plaster. There was an odd air bubble but the result was quite good generally. In the pictures below you can see from left to right: the metal sculptures, the latex mould and the plaster cast from the latex mould.

Casts from Clay Imprints

These plaster Buddhas were made by pushing the metal Buddha statues (dark in these photos) into soft clay, carefully taking them out and then pouring plaster into the resultant impressions. Really quick to make and surprising detail can be achieved.